SealXtreme Leak Repair Kit
FEATURES:
- Withstand pressure up to 27 bar (400 psi) & temperature up to 120 °C post-curing
- Fix leaks in less than 30 minutes
- Hand-Applied
- Works on both metal and non-metal pipes
- Enhance chemical resistance
- Repair & extend pipe life
- Environmentally friendly, reduce carbon footprint
KEY TECHNICAL DATA:
- Tensile Strength: 1655 bar
- Lap Shear Strength: 62 bar
- Flexural Strength: 1103 bar
- Application Temperature: 0 °C to 65 °C
- Dielectric Strength: 16,000 volts
- Hardness: 85 Shore D
- Service Temperature: -50 °C to 120 °C
- Design Pressure: 28 bar
PACKAGING INFORMATION:Each Kit Contains:
- QuikControl Fiberglass Repair Tape
- SmartStic Underwater Epoxy Stick
- Protective Gloves
Kit Sizes:
- 2” x 6’, 3” x 9’, 4” x 12’
HOW TO APPLY:
- Safety first, wear appropriate protective gear. Gloves are a must.
- Knead the epoxy stick until 80% harden.
- Use the 80% cure epoxy stick to seal the leak.
- Dip the fiberglass repair tape in water for 5 seconds.
- Reinforce the repair area with fiberglass repair tape.
- Polish the surface of fiberglass repair tape with water and rub in a parallel direction with the pipe.